The Axial SMT10 Grave Digger RTR 1/10 4WD Monster Truck is a true-to-scale, 4-wheel drive, straight-axle Monster Jam RC truck thats the perfect basher for everyone from scale RC enthusiasts to full-size monster truck fans. Everything going on beneath the scale body is just as exciting.Axial designers went all out when creating the chassis and roll cage for the SMT10 Grave Digger monster truck. Very similar to those of full-size Monster Jam trucks, the SMT10 tube frame chassis was developed for maximum strength and has an extremely realistic appearance. There are a variety of shock mounting points for suspension tuning options, with additional mounting points on the cage and at the axle for moving the shocks to a more scale, vertical position if desired.
Mated to the proven Axial AR60 axle, the 4-link suspension soaks up any obstacles in its path. The SMT10 comes factory-built and ready-to-run with updated, improved electronics and radio gear. The Dynamite 550-size motor provides higher torque and top speed for pulling off radical monster truck moves. Its matched with a LiPo- and NiMH-compatible Dynamite 60A ESC that features forward/brake/reverse, forward/brake and crawler drive modes.
The included FHSS 2.4GHz radio gear is all high-quality Spektrum brand equipment. The STX2 2-channel transmitter and SRX200 receiver provide fast response and outstanding range. Enjoy precise, interference-free control while striking terror in your bashing competition! 550 SIZED 12-TURN MOTOR: Among the updates Axial designers have given this Grave Digger truck is a more powerful Dynamite 550-size 12-turn brushed motor. It provides increased torque and top speed to help you pull off radical monster truck moves.
DYNAMITE 60A FWD/REV BRUSHED ESC, WATERPROOF: This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Waterproof for all weather operation.
2S Li-Po down to 12T. Program functions changed with the use of jumper pins.
AX10 TRANSMISSION, ALL METAL INTERNAL GEARS: Updated Dual Pad slipper system with 32 Pitch gearing. New slipper design uses a pad on each side of the spur gear for added surface area. More precise tuning and holding power.
Stronger 32P gearing for high torque applications. 56T Spur / 14T Pinion RTR gearing for 2S.
All metal internal transmission gears. ICONIC GRAVE DIGGER BODY: Genuine Grave Digger body, licensed by Feld Motorsports. This is a real as it gets!040 polycarbonate replica of the classic Grave Digger 1950 panel van. 040 scale interior with driver figure. Axial went all out when designing the chassis and roll cage for the SMT10 Grave Digger Monster Jam® Truck. Very similar to the modern era full size monster trucks, this chassis was developed for maximum strength and an extremely detailed appearance. The chassis offers many pivot points for suspension tuning. Scale realism and strength are achieved through triangulation of the chassis tubes, making it ready for maximum attack and hard core Monster Truck bashing. Their special BKT Monster Jam Tire is purpose-built for the rigors of Monster Jam Truck racing and freestyle competition just as these 1/10 scale BKT tires provide scale realism and maximum performance for your Axial Monster Jam truck. 2.2 MONSTER TRUCK WHEELS: The 2.2 monster truck wheels are molded from high-quality nylon and secured with a solid 12mm hex mount. 2.2 Monster Truck Wheels (silver).
Molded from a blend of high quality nylon materials for strength and durability. AR60 OCP-AXLE: AR60 OCP-Axle - The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon.
The combination of these axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle. Axle tubes are reinforced with a boxed-in axle truss. Updated steering knuckles for dual shear.TRAILING ARM 4-LINKED REAR SUSPENSION: The SMT10 features the proven AR60 axle with a trailing arm 4-linked rear suspension and additional shock mounting positions. HYDRAULIC RAM STYLE STEERING LINKS: Axial engineers designed a heavy-duty tie rod, drag link, and simulated scale hydraulic ram steering link to keep the massive BKT tires pointed in the right direction so you stay on course. WB8 HD DRIVESHAFTS: The Grave Digger trucks WB8 HD driveshafts feature an updated design with a larger diameter crosspin (2x11mm) for extra strength. Material added on the center splined slider reduces flex and fatigue.
REAR SWAY BAR: The rear sway bar helps to keep torque twist and body lean to a minimum during acceleration. The SMT10 chassis design allows you to add an optional sway bar to the front if desired. MULTIPLE SHOCK MOUNTING POSITIONS: Axial included a variety of shock mounting points for additional suspension tuning options. Theres also additional mounting points on the cage and at the axle for moving your shocks to a more scale, vertical position if desired. EASY-ACCESS BATTERY TRAY: The battery tray is easy to access from the rear of the vehicle.
To install your battery, remove one pin, swing out the tray door and slide in the battery pack. Four screws adjust the height of the tray, allowing room for most standard 2S batteries. WATERPROOF RECEIVER BOX: The waterproof receiver box uses three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. Run without worry in mud, water or snow! SPEKTRUM STX2 FHSS 2.4GHz 2-CHANNEL TRANSMITTER.Extended range and interference-free performance. SPEKTRUM SRX200 FHSS 2.4GHz 2-CHANNEL RECEIVER. Conformal-coated for protection against the elements. Extra-long antenna lead for easy and effective placement. Waterproof receiver box with silicone seals for the antenna, servo wires and cover.
SPEKTRUM S614 SERVO: The Spektrum S614 metal geared servo offers 201 oz-in of steering torque, a metal case for strength, and its waterproof for extra protection against the elements. GLOW IN THE DARK: Glow in the dark helmet set included! Approximate Assembly Time: Less than 1 Hour. Battery Dimensions: 138.5x46x25mm (LxWxH).
Ground Clearance: 2.9 (74mm). Suspension: Solid axle 4-link front and rear, rear sway bar. Tire Diameter: 5.6 (142mm). (2.90kg) w/o battery, 7.1lbs (3.22kg) w/2S LiPo battery.
Wheel Diameter: 2.2 (56mm). Wheel Hex Size: 12mm Hex. Wheel Type: 2.2 (56mm) monster truck. Wheel Width: 2.95 (142mm). (1) Axial SMT10 Grave Digger 4WD Ready-to-Run.
(1) Spektrum STX2 2.4GHz Transmitter. (1) Dynamite DYNS1222 12-Turn 550 Brushed Motor. (1) Dynamite DYNS2210 60A FWD/REV Brushed ESC. 2S LiPo Battery Pack with IC3 connector.
(4) AA batteries for the transmitter. The item "Axial 1/10 SMT10 Grave Digger 4 Wheel Drive Monster Truck Ready to Run AXI03019" is in sale since Friday, January 10, 2020. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicles & Kits\Cars, Trucks & Motorcycles". The seller is "rchobbyexperts" and is located in Saint Paul, Minnesota. This item can be shipped worldwide.