L EOPARD 1/8 C OMBO 6S. New V2 Leopard 4275 2000KV Brushless Motor. New ESC Ground 160A BL6 WP (the HexFly 6S with Leopard brand).
1/7 and 1/8 on road. 1/8 and 1/10 Buggy and Monster Trucks. ESC GROUND BL6 WP 160A LEOPARD. 160A ESC: maximum performance on 6S LiPo (ESC MAMBA only 120A).
Waterproof and equipped with Power Switch in additional to built-in Anti-Spark System. 160A continuous and impressive 1050A peak.
Set it by''Led Program Card'' (from Leopard or Hobbywing). This ESC is applicable to various 1/6th, 1/7th, 1/8th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E.It's the ideal option for high-end aggressively powered builds. Amps (160A) and high peak amps (1050A). Multiple protections for maximum durability.
Advanced and Secure Electronic Light Switch. Regular Firmware Updates Free of Charge. Developed especially for powerful 1/5, 1/6, 1/7 and 1/8 motors. Extremely smooth and precise brushless motor working. Ideal for replacing XO-1 and X-Maxx 6S stock ESC.Recommended also to 1/5 Motors on 6S. Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the GROUND 160A/ GROUND 200A is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. With incredible acceleration capabilities and a rock-solid, stable output, the GROUND 160A/ GROUND 200A can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions. The waterproof and dust-proof design allows the Ground 160A or 200A to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. The Ground 160A/ Ground 200A has adopted the world first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today high voltage servos on demand used by large scale vehicles. Advanced and Secure Electronic Switch. The GROUND 160A/ GROUND 200A features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection). You can upgrade the GROUND 160A/ GROUND 200A with the Leopard (or Hobbywing) Program Led Card or''Hobbywing'' USB LINK software, a multifunction LCD program box and a laptop.'Hobbywing'' updates its ESC firmware regularly giving you upgraded features more often when available. The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces. The GROUND 160A/ GROUND 200A is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/ 6S/ 7S/ 8S). GROUND 200A provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy. It is also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggies. And GROUND160A is applicable to various 1/6th and 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E and light 1/5th scale car vehicles. It is the ideal option for high-end aggressively powered builds. Motor type: Sensored / Sensorless Brushless Motor (only in sensorless mode). Applications: 1/6th Touring Car, Buggy, Truggy and Truck. LiPo / NiMH cells: 9-24S NiMH, 3-6S LiPo. BEC output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC). Cooling fan: Powered by the stable BEC voltage of 6V/7.2V.
Connectors: Input End: No, Output End: Female 6.5mm Gold Connectors (pr e-soldered onto the PCB of the speed contr oller). Programming port: FAN / PRG Port. (3) 10 AWG, 200C Black wires for a brushless motor (6.5mm male bullet on one end to plug into ESC, bare ends on other). LEOPARD 4275 2000KV V2 SERIES MOTOR.Leopard Motors are built using the highest degree of components for excellent performance and long life. The latest generation 4-pole rotors provide massive torque, and Kevlar are packed to ensure the magnets stay stationary at all of the RPM. All components are machined, balanced and hand-built to ensure quality, and with an extensive line of products includes various sizes that you simply will not find from other manufacturers you are sure to find a Leopard motor to fit application. Imported from high-speed Japanese bearings.
Hand wound stator, using high-purity / high-temperature copper wire. They are warranted to be free from.
Speed Controllers used in extreme. If the product needs to be repaired or. Information about using the product. These charges are buyers responsibility. DHL Express or EMS Worldwide.Delivert Time (economic): 7-19 busines days. We hope it arrives on time; however, since this. The item "New Motor 4275 2000KV 6S Leopard Brushless + ESC BL6 WP 160A 6S by EXPRESS" is in sale since Monday, October 29, 2018. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Body Parts & Interior\Cars, Trucks & Motorcycles". The seller is "r-mambabrushless" and is located in Shenzhen.
This item can be shipped to North, South, or Latin America, all countries in Europe, China, Japan, Australia.