Radio Controlled Black

Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose


Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose
Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose
Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose
Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose
Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose
Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose
Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose

Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose   Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose

Thank you for stopping by! We specialize in automotive aftermarket installations and iPod/iPhone integration for both OEM and aftermarket radios. Have any questions and/or comments?

Our customer service team is ready to help. This fixed-price combo listing includes the. R adio Replacement Adapter Interface for Bose Systems and. Steering Wheels Controls Adapter Interface. The PAC OS-2X interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios.

Using this interface will retain factory features such as OnStar, warning chimes, Rear Seat Controls (RSC), Rear Seat Entertainment (RSE) and the BOSE amplifier when the original radio is removed. The OS-2X also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake. Retains the built-in steering wheel controls in vehicles when replacing the factory radio with an aftermarket radio. It is compatible with todays most popular vehicles, even with more complex electronic systems including CAN bus, GMLAN, and Class II systems.

The simple to use module can be configured in multiple ways, via dip switches, direct from a USB connected PC, or a button learning procedure. Wiring and vehicle configuration dip switch settings are provided through the ControlPRO APP, available for PC, and Android and iOS devices. The SWI-CP2 is designed to minimize installation time, much faster than any other products available in the market today. In-field updateable firmware via USB.

Chime Module Included, with 4 level adjustability. Retains OnStar® when the factory radio is replaced. Retains Bose amplified audio system (if equipped). Provides 10 Amp 12-volt accessory output. Retains all safety warning chimes. Maintains a healthy status on the Class II databus. Retains Rear Seat Radio Controls. Retains Rear Seat Audio (connects to aftermarket radio aux input). Plug-in installation for vehicles with 24-pin harness. Easy to use and time saving. Works on analog (resistive) and data SWC systems.

Dip switch, vehicle lookup and switch setting provided by ControlPRO APPs (PC, iOS & Android). Direct flash from ControlPRO APP for PC (USB connection required). Direct flash from iOS and Android smart phones with future PAC-UP2 Programming Tool Avail.

Provides 2 Amp, 12V ACC output (CAN applications). The interfaces accessory output is only rated at 10 amps. It is designed for the new aftermarket head unit ONLY.

For Bose systems, the recommended line level input is 2-4 volts from the aftermarket radio. To prevent over driven audio when installing into a vehicle with a Bose system and the aftermarket radio does not have low level outputs then an LOC (part # LP3-2) is recommended to match the input voltage or you can create an audio attenuation circuit. To prevent ground loop or engine noise when installing aftermarket radios that use a common ground on the outer shield of the low level outputs will require a ground loop isolator.

Does not retain the HVAC controls found in some General Motors vehicles. Compatible with Advent, Alpine, BOYO, Clarion, Dual, Fusion, JVC, Lightning Audio, Kenwood, Nakamichi, Pioneer, Rockford Fosgate, Sony, and Visteon. SWI-CP2 Steering Wheel controls retention adapter. General Installation and Operation Manual. Only compatible with listed vehicles.

This is what most consider is the hardest part of the installation. With this diagram; installation is a piece of cake. Vehicles NOT made for the U. Market are not compatible and are not guaranteed. The item "Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose" is in sale since Wednesday, June 14, 2017.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts".1" and is located in Miami, Florida. This item can be shipped worldwide.

  1. Modified Item: No
  2. Country/Region of Manufacture: China
  3. Custom Bundle: Yes
  4. Material: Plastic
  5. California Prop 65 Warning: WARNING: Cancer and Reproductive Harm
  6. Type: Car Audio
  7. Color: Black
  8. Manufacturer Part Number: OS-2X
  9. Placement on Vehicle: Front
  10. Other Part Number: SWI-CP2
  11. Brand: PAC
  12. Fitment Type: Performance/Custom
  13. Non-Domestic Product: No
  14. Warranty: 1 Year
  15. Mounting Hardware Included: No
  16. Bundle Description: This listing includes one OS-2X radio replacement interface and one SWI-CP2 steering wheel control retention adapter.
    Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose   Radio Replacement & Steering Wheel Controls Retention for GM with OnStar & Bose