Radio Controlled Black

Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006


Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006

Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006   Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006
This is the Serpent Spyder SRX-2 MM Mid-Motor 2WD Ready-To-Race 1/10 Scale Electric Buggy, with an included 2.4GHz Radio System. Designed by World Champion Billy Easton in the USA, the RTR Spyder buggy is based on the high end competition version of the Spyder MM buggy. To keep parts compatibility simple, both buggies share most components and suspension geometry, while also sharing optional upgrades that can be equipped to the vehicle later.

Pre-Painted Body and Rear Wing The prepainted and pre-cut light and low cab-forward style body is made from top quality clear polycarbonate material and features a nice flowing line with a steep front windscreen for high performance downforce. The shark fin on the roof of the cabin not only offers style and great looks, but also stability for high-speed travel. The polycarbonate rear wing utilizes raised chutes in the sides to improve wheel clearance.

Additionally, the rear wing mount is adjustable from 0, 2, 4, 6 and 8 degrees to further fine tune downforce adjustment. Brushless Motor and Electronic Speed Controller The DragonRC DX-10WP ESC provides 45A current while being compatible with either 2S LiPo, 3S LiPo and 6-cell NiMH batteries.

The 9-T Sensorless motor is a 9 Turn modified motor offering 3000kV of high power and excitement. The entire motor is built on a full aluminum, maintenance-free can, for hours of fun. Prepainted & Precut Buggy Body & Wing. Waterproof 45A Electronic Speed Controller.

Expert Factory Assembly & Set-up. Gear Differential & Solid Slipper.

Hard Composite Chassis & Shock Towers. Big Bore 12mm RCM Type Shocks with Dual System.

Specifications: Length: 385mm Width: varies with set-up Wheelbase: 281mm Gear Ratio: 2.43:1 Weight: varies with electronics used. 2S 7.4V LiPo Battery or 6-Cell 7.2V NiMH Battery w/T-Style Connector.

Note: The pictured transmitter may not represent the transmitter included with this vehicle. Serpent selects transmitters based on availability at the time of packaging. The item "Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006" is in sale since Tuesday, March 3, 2020. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicles & Kits\Cars, Trucks & Motorcycles". The seller is "amain" and is located in Chico, California.

This item can be shipped worldwide.

  1. Brand: Serpent
  2. MPN: SER500006
  3. Country Of Manufacture: China, People's Republic of
  4. Harmonized System Code: 8526.92.50.00
  5. Drive Train: 2 Wheel Drive
  6. Vehicle Type: Buggy
  7. Power Plant: Electric
  8. Kit Completeness: Ready to Run
  9. Scale: 1/10 Scale


Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006   Serpent Spyder SRX-2 MM Mid-Motor 2WD RTR 1/10 Electric Buggy SER500006